Short, Fat, and Fun (description approved by Quest!) The short length of this rocket makes it only flyable on A size engines. If you fly it with a B or C, then you will need to add nose weight (not included). Features balsa fins and streamer recovery.

Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.

This kit requires assembly. Hobby glues, finishing supplies, building tools, launch system and rocket motors for launching are not included.

Launch supplies sold separately. Requires Complete Launch System (Q7700), Quest Q-Jet™ rocket motors with FirstFire Micro™ Initiators and Recovery Wadding. One 9-volt, snap-top, Lithium battery is required for the Q2 Launch Controller – Not Included.

Recommended for ages 10 to adult. Direct adult supervision is suggested for those under 12 years of age when building or flying model rockets.

• Specifications:

  Skill Level 1

  Length: 7.5 in. (19 cm)

  Diameter: 1.575 in. (40 mm / T40)

  Weight: 1.1 oz. (31.2 g)

  Recovery: Streamer

  Fins: Laser-cut Balsa

  Décor: Self-adhesive Decals

  Flights up to 300 ft. (91.5 m)

  Uses Quest Q-Jet™ Black Max™: A3-4FJ (1st flight), B4-4FJ rocket motors.

  Uses Quest Q-Jet™ White Lightning™: B6-4W rocket motors.

  Other brands of model rocket motors, with a similar motor type (power) designation, should be OK for use in this product.