Show your patriotism and fly the America. Balsa fins and a molded plastic cone make this a good Skill Level One build with parachute recovery.

Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.

This kit requires assembly. Hobby glues, finishing supplies, building tools, launch system and rocket motors for launching are not included.

Launch supplies sold separately. Requires Complete Launch System (Q7700), Quest Q-Jet™ rocket motors with FirstFire Micro™ Initiators and Recovery Wadding. One 9-volt, snap-top, Lithium battery is required for the Q2 Launch Controller – Not Included.

Recommended for ages 10 to adult. Direct adult supervision is suggested for those under 12 years of age when building or flying model rockets.

• Specifications:

  Skill Level 1

  Length: 14 in. (35.6 cm)

  Diameter: 1.181 in. (30 mm / T30)

  Weight: 1.1 oz. (31.2 g)

  Recovery: 14 in. Parachute

  Fins: Laser-cut Balsa

  Décor: Self-adhesive Decals

  Flights up to 1500 ft. (457 m)

  Uses Quest Q-Jet™ Black Max™: A3-4FJ (1st flight), B4-4FJ, C12-4FJ, C12-6FJ, C12-8FJ, D16-6FJ, D16-8FJ rocket motors.

  Uses Quest Q-Jet™ White Lightning™: B6-4W, C18-6W, C18-8W, D20-6W, D20-8W rocket motors.

  Other brands of model rocket motors, with a similar motor type (power) designation, should be OK for use in this product.