Brands

Showing 1–20 of 410 results

  • 2265

    15″ Printed Parachute

    This 15 in. (38 cm) parachute is preassembled and ready to use on model rockets that require a 15 in. parachute. The perfect size when an […]

    $4.49
  • 9750

    18mm Engine Retainer

    Strong, durable, lightweight. This engine retainer is the finest on the market.

    $5.99
  • ANTAR™

    Our dedicated designers here at Estes have taken G. Harry Stine’s original model, sketches and drawings of the ANTAR, and brought it back to life. Now you get buy your very own piece of rocket history today.

    G. Harry Stine believed in a future for humanity among the stars, and his life’s work was dedicated to that dream.
    Harry Stine (NAR#02) is known as the “Father of Model Rocketry” and founder of the National Association of Rocketry. One of the original pioneers that founded the hobby right alongside Vern Estes, Stine was also a talented writer. This Estes Designer Signature Series kit is a faithful reproduction crafted by Estes designers from many sketches Stine created as well as the actual original model which is from the personal collection of Estes Vice President Bill Stine (who happens to be Harry’s son). Antar was not designed as a flying model rocket because in 1951 the hobby didn’t exist yet! Stine was a physicist and clearly understood the science of flight, so even though Antar was a fictional vehicle, the science behind it meant it could be stable in flight.

    WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, yellow glue, hobby knife, masking tape, wax paper, sand block, primer (white), paint rust-oleum (deep forest, silver, white) and clear coat (optional). (Tools, construction and finishing supplies not included.)

    WHAT YOU NEED TO LAUNCH (sold separately):Porta-Pad II Launch Pad and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).

    $24.74
  • Astrocam

    Ever wonder what the view is like from 900 feet high? Well, wonder no more! The Estes Astrocam® flying model rocket allows you to to capture audio and video from a rocket in flight. The Estes Astrocam is a marvel of rocketry design combined with twenty-first century electronic miniaturization. It comes equipped with its own high-definition digital video camera and a specially engineered nosecone to house the camera during flight. The video footage is so clear and realistic, it’s almost like being there!

    WHAT YOU NEED TO BUILD: Clear tape. (Tools, construction and finishing supplies not included.)

    WHAT YOU NEED TO LAUNCH: Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).

    $41.24
  • Boosted Big Bertha

    1946 Technical Specifications: Skill Level: Advanced GTIN 047776 019461 Length: 28.2 in. Diameter: 1.64 in. Estimated Weight: 4.00 oz Estimated Assembly Time: 4 Hours (painting and […]

    $24.74
  • 1714

    Build N Blast

    Estes Rockets is your go to hobby model rocket supplier

    $206.24
  • 2252

    C-11, D & E Ignitor Plug

    Need extra Starter Plugs? You’ve put them away and can’t find them or you’ve lost them? Regardless of the reason, we’ve got you covered now! Included […]

    $5.24
  • Q-Jet-Motor-hero

    C12-6 Q-Jet Model Rocket Motors (12 Pack)

    Value pack of 12 ea. C12-6 Q-Jet™ model rocket motors. Includes initiators and wadding.

    $29.40
  • C5-3 Engines

    The Estes Super C is back! Reintroducing the Estes C5-3 engine – 50% increase in maximum thrust over a standard C engine and the punch you need to propel those heavier rockets off the pad. The Super C is a great choice for larger birds and for payload rockets, like competition egg-lofters, that need that extra push.

    $10.79
  • 23065

    Custom Rockets 1/4″ x 48″ Shock Cord

    1/4″ x 48″ (10mm x 19cm) shock cord. The shock cord is what is used to tie the nose cone to the body of the rocket, […]

    $2.39
  • 23065

    Custom Rockets 1/8″ x 15″ Shock Cords 10pcs

    1/8″ x 15″ shock cord. Includes 10 pieces. 10 pieces per pack.

    $1.79
  • 10047

    Custom Rockets Atomic Model Rocket

    Skill Level 1 Atomic is a six finned kit that comes with a durable injection-molded plastic nose cone, die-cut balsa fins, and 12″ parachute recovery. Includes […]

    $6.57
  • Custom Rockets Atomic Model Rocket Bulk Pack (12 each)

    Custom Rockets Atomic Bulk Pack (12 pack) Skill Level 1

    $67.01
  • 10039

    Custom Rockets ATW Model Rocket

    Skill Level 1 This model emulates an army anti-tank rocket. Injected molded plastic nose cone, die-cut balsa fins, and streamer recovery. Includes precision printed water-slide decals. […]

    $5.37
  • 23086

    Custom Rockets BH-50 Balsa Bulkhead

    Custom Rockets BH-50 Balsa Bulkhead – Balsa bulk head or nose block. Used to make payload sections or seal off a tube. Fits BT-50 size tubes […]

    $1.80
  • 70029 Bits N Bytes

    Custom Rockets Bits N Bytes Model Rocket Bulk Pack (12 each)

    Skill Level 1 Digital decor make this a fun sport rocket. Easy paint scheme for finishing. Features plastic nose cone, laser-cut balsa fins, and streamer recovery. […]

    $60.89
  • Custom Rockets Bits n’ Bytes Model Rocket

    Skill Level 1 Digital decor make this a fun sport rocket. Plastic nose cone, laser-cut balsa fins, and streamer recovery. Includes large pressure-sensitive decal and quick-release […]

    $5.97
  • 23025

    Custom Rockets CD-2055 Centering Rings (10 Disc Rings)

    Centering disks to center a BT-20 size tube within a BT-55 4 discs per package

    $1.49
  • 23040

    Custom Rockets CD-2060 Centering Rings (8 Disc Rings)

    Centering disks to center a BT-20 size tube within a BT-60 4 discs per package

    $1.49
  • 23035

    Custom Rockets CD-5060 Centering Rings (8 Disc Rings)

    Centering disks to center a BT-50 size tube within a BT-60 4 discs per package

    $1.49
1 2 3 4 19 20 21